This is topic Elmo VP-C belt needed in forum 8mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=001294

---

Posted by Boris Rabinsky (Member # 2548) on April 28, 2011, 06:50 PM:
 
I need a long belt for Elmo VP-C. Also, maybe someone has a service manual for this projector.

You can respond here or send a message to b_r_e_g <at> hotmail <dot> com (with prices including shipment to Toronto please).

Thanks!
 

---

Posted by Pasquale DAlessio (Member # 2052) on April 28, 2011, 07:34 PM:
 
Boris

You can find a manual at this link.

http://www.camerabooks.com/Products/Elmo-VP-C-Instruction-Manual__MP9167ELMOVP-CMAN UAL.aspx

If you can't find a belt try this link:

http://www.mcmaster.com/#

When you get there click on "power transmission" on the left. Then click on belts. If they don't have it pre-made they make it. And it's not expensive.

Pat D
 

---

Posted by Boris Rabinsky (Member # 2548) on April 28, 2011, 08:14 PM:
 
Pat, thanks for great links!
 

---

Posted by Pasquale DAlessio (Member # 2052) on April 28, 2011, 08:47 PM:
 
My pleasure. That's what this forum is all about

Pat
 

---

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC


UBB.classic^TM 6.3.1.2