8mm Forum: Need 6V10W Bulb for Elmo 912 Editor

This is topic Need 6V10W Bulb for Elmo 912 Editor in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=001362

Posted by Joe Taffis (Member # 4) on July 06, 2011, 05:51 PM:

Could someone tell me where I can buy a replacement bulb for the Elmo 912 8mm editor? Thanks [Smile]

Posted by Pasquale DAlessio (Member # 2052) on July 06, 2011, 05:55 PM:

Try topbulb.com
[Big Grin]

Posted by Jon Addams (Member # 816) on July 07, 2011, 12:28 AM:

Hello Joe,

Send me your shipping address at jaddams55 at hotmail dot com and I will send you one.

Jon

Posted by Mark L Barton (Member # 1512) on July 07, 2011, 03:45 AM:

You can use a motorbike stop light bulb, I used to get the bulbs from my local motorbike shop. Cheers

Posted by John Davis (Member # 1184) on July 07, 2011, 01:13 PM:

Are you sure the motor bike lamps work? I have tried a car light of the same size as an emergency measure and the light output was dire.

Posted by Martin Jones (Member # 1163) on July 07, 2011, 02:30 PM:

See the M29 bulb on this page http://www.aavon.com/xenophot.html
They sell a conversion which includes this Halogen Bulb and a Adapter Base.

Posted by Joe Taffis (Member # 4) on July 07, 2011, 08:43 PM:

Thanks all [Smile]

Posted by Jim Schrader (Member # 9) on July 08, 2011, 10:33 AM:

your hardware store or automotive store should have these as well

Posted by Joe Taffis (Member # 4) on July 15, 2011, 04:55 PM:

hi Jon, received today...many thanks! [Smile]

UBB.classic^TM 6.3.1.2