This is topic Wanted:Kodak Universal Presstape Splicer in forum 8mm equipment for sale/trade at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002197

Posted by Brian Stearns (Member # 3792) on August 24, 2013, 06:10 AM:
 
Does anybody have a Kodak Universal Presstape Splicer or super 8mm splicer lying around that they don't want?

keep me in mind if you do thanks
 
Posted by Bruce Wright (Member # 2793) on August 24, 2013, 10:23 AM:
 
Brian -- I have the splicer. Don't know where I got it, but I never used it. Pm me your address and I will mail in a couple of days. Only paddle to the post office twice a week. No cost. Just put it to use. Yes, I to have received help from this forum. Bunch of great folks [Smile]
 
Posted by Brian Stearns (Member # 3792) on August 24, 2013, 12:02 PM:
 
Pm sent thanks a bunch
 
Posted by Bruce Wright (Member # 2793) on August 26, 2013, 05:19 PM:
 
Brian; The splicer is boxed, Sad news--can't open my email.
I get the red letters that say "wrong password". On line service (what ever langue) could not reset my password. Local Cox office tells me they will be here Wednesday afternoon. I'll paddle up to the post office on Thursday for mailing. Or do you have another suggestion ? It even has the plastic push-tube.
 
Posted by Brian Stearns (Member # 3792) on August 26, 2013, 07:58 PM:
 
Not a problem
 
Posted by Bruce Wright (Member # 2793) on August 28, 2013, 03:43 PM:
 


[ August 28, 2013, 09:44 PM: Message edited by: Bruce Wright ]
 
Posted by Brian Stearns (Member # 3792) on August 28, 2013, 09:14 PM:
 
It maybe time to get gmail or something. more stable. I dont like those provider based emails because if you drop the service then its a hassle

anyways thanks for the update
 
Posted by Bruce Wright (Member # 2793) on August 29, 2013, 03:38 PM:
 
Good news [Smile] The splicer was delivered to the PO.
at about 11:00 cdt. You should get it in 3 to 4 days.
Labor Day could cause a delay. Hope it works for you.
 
Posted by Brian Stearns (Member # 3792) on September 01, 2013, 03:28 PM:
 
Got the splicer today thanks a bunch,Brand new and includes lots of splicing tape. Thanks again
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2