This is topic Eumig Series 900 spares in forum 8mm equipment for sale/trade at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=002488
Posted by Maurizio Di Cintio (Member # 144) on September 27, 2014, 03:39 AM:
I am selling part of my spares' inventory: some of them are salvaged but in good to very good condition and actually usable to refurbish a worn out projector; some others are old new stock; in some cases I have more than one unit; the following are priced at € 15 each.
pinch roller
capstan
flywheel
rear film chute (with roller)
film inlet chute (models. 903-926 and similar)
folding rewind roller (models 903-926)
rear sprocket wheel
claw arm (models 903-926)
main shaft with shutter cam, complete with worm gears etc. (models 903-926)
film pressure shoe, complete with plastic mount
film aperture plate (models 903-926)
transmission discs with rubber sidings
toothed belt
belt tensioners (for above)
plus many other upon request.
Mono-sound head for models 905, 932 and similar (complete with head mount, leads, connector, screws): € 35
Sound pressers assembly for models 905, 932 and similar: € 20
Mono sound head for models 909, 934 and similar ones: € 35 (complete with head mount, leads, connector, screws)
Motor (all models): € 40
Transfomer (Part No. necessary, because I have three different ones - sorry, European only): € 45
Postage at cost anywhere in the world
PM me if interested.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2