This is topic Elmo GS800 motor pulley needed in forum 8mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:;f=3;t=002507

Posted by Pete Richards (Member # 2203) on October 19, 2014, 06:20 AM:
The pulley wheel attached to the motor in my GS800 has a split in it, (the white nylon/plastic wheel that the belt goes around)

Does anyone know where I can get a replacement, also looking for replacement bulbs as well.
Posted by Pete Richards (Member # 2203) on October 26, 2014, 05:43 AM:
Apparently the GS600 pulley is the same, so if anyone has one of those laying around....
Posted by Mark Todd (Member # 96) on October 26, 2014, 06:55 AM:
Sorry I don`t but I know John White knows a chap can make pulleys.

Best Mark.
Posted by Steve Klare (Member # 12) on October 27, 2014, 08:32 AM:
It sounds like something that should be still be available commercially, either from an industrial supplier or if it is very small maybe a hobby supplier.

What is the shaft diameter, the belt diameter and the pulley diameter?
Posted by Jon Addams (Member # 816) on October 27, 2014, 08:56 AM:
Replacement lamps for the GS-800 are widely available on eBay, other online vendors, some local cameras and lighting stores.

It uses a 100 W, 12 V, EFP lamp.


Visit for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation