8mm Forum: Fixing of anamorphic lens bracket on Elf Eiki projector

This is topic Fixing of anamorphic lens bracket on Elf Eiki projector in forum 16mm Forum at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=000397

Posted by Robert Lewis (Member # 1458) on February 07, 2009, 05:48 AM:

I have only just joined the Forum and so I guess I should first of all say hi to everybody.

Having done that, I am looking for some advice.

I have an Elf Eiki ST1-H and a drop down anamorphic lens bracket. The problem is that at the present time they are not attached to each other!

I want to fix the bracket to the projector and I see the two screws just below the lens which is where the bracket should be fixed. It seems to me, however, that it is necessary to remove the two screws, then screw the bracket on from the inside of the projector. To do that, it seems to be necessary to remove the transformer unit in order to gain access from the inside.

Am I correct?

Any general advice would be most welcome.

UBB.classic^TM 6.3.1.2