This is topic Bell & Howell TQM 2678A Help in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=000696
Posted by Barry Webb (Member # 1897) on September 24, 2011, 03:09 PM:
 
Hi all can someone please help i have just picked up a very nice TQM 2678A Slot Load bell & howell projector but it seems to have a slight problem in that when you start to show a film the film comes out of the gate to fast and starts to build up at the bottom of the gate but the take up spool is running ok.
Any ideas anyone.

[ September 24, 2011, 04:25 PM: Message edited by: Barry Webb ]
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2