This is topic Eiki Lamp in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=000807
Posted by Brian Collins (Member # 761) on October 24, 2012, 07:06 AM:
 
I have an Eiki Elf ST/M (ST-1H) projector that needs a new lamp but am confused (easily done these days) It calls for 24v 200w but when checking the power to it the readings are 24v AC but no reading on DC. am I missing something here and where can I get such a lamp.
Thanks
 
Posted by Mal Brake (Member # 14) on October 24, 2012, 10:13 AM:
 
Hi Brian,
The lamps run on AC so your readings are correct.
The lamp you need is A1/252 available from http://www.fosterfilms.co.uk/accessories.htm
 
Posted by Brian Collins (Member # 761) on October 24, 2012, 11:13 AM:
 
Thanks Mal. Had this machine for years but never even plugged it in and there was no lamp in it.
Thanks again
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2