This is topic 16mm reel centres in forum 16mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=000835
Posted by Vidar Olavesen (Member # 3354) on January 09, 2013, 12:22 PM:
Are there different 16mm reels too? I found out I have one that doesn't fit the arm, the centre is not the same ...
Anyone have a solution? (I guess the obvious is buy another reel And I will if there's nothing I can do) ... Thank you
Posted by Fabrizio Mosca (Member # 142) on January 10, 2013, 02:50 AM:
Hi Vidar,
usually the center is a square on both sides of the spool, even if there are some spools that have a square on one side and a hole on the other side (the hole should be placed on the outside part of the spindle, when you load the spool on the projector).
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2