This is topic Drive Belt removal Update in forum 16mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001230
Posted by Bill Shenette (Member # 4561) on February 08, 2015, 05:41 PM:
My friend helped me take off the belt.
Then I took some "Very Smelly" stuff called Rubber Re-New.
Using this I was able to get it going again .
The belt itself was worn on 0one side .
Thus thinking about being a flat belt reversing it/aka turning it in side out,,, The Film Projector now works temporary
:)Sincerely Bill
[ February 23, 2015, 12:31 PM: Message edited by: Bill Shenette ]
Posted by Andrew Woodcock (Member # 3260) on February 08, 2015, 05:59 PM:
On what Bill? Give your patriots a clue.
Posted by Maurice Leakey (Member # 916) on February 09, 2015, 02:31 AM:
Bill was saying earlier that he was getting a new drive belt for his Bell & Howell 535.
Posted by Andrew Woodcock (Member # 3260) on February 09, 2015, 08:08 AM:
Thanks for clarifying Maurice
Posted by Bill Shenette (Member # 4561) on February 12, 2015, 03:32 PM:
Yes Thanks Andrew
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2