This is topic 2nd time of asking. in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001413

Posted by James Wilson (Member # 4620) on March 21, 2016, 09:25 AM:
 
Hi,
I hope someone can help?
I have two Rank Aldis 16mm projectors, can you tell me what to fill the reservoir up with. I`ve tried engine oil but it is to thin, at the moment I`m using Carlube Silicone multi purpose grease, Im not sure if this is right, any Ideas.
Many Thanks,
James.
 
Posted by Maurice Leakey (Member # 916) on March 21, 2016, 11:01 AM:
 
The Rank Aldis is a badged Bauer P6. Perhaps a Bauer owner could answer your question.
 
Posted by Josef Grassmann (Member # 378) on March 24, 2016, 09:06 AM:
 
Hello James,
answer had been given - on 12. March - to your first asking.
Bauer approved that special white grease, only!
It is very soft, so that felt can get a certain ammount of oil out of grease. Never use oil to top up reservoir.
Grease and oil is sold by us, if required.

regards
Josef
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2