This is topic TQI Lamp Conversion in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001893

Posted by Maurice Leakey (Member # 916) on October 29, 2018, 09:35 AM:
 
Owners of the Bell & Howell TQI models know that the projectors have a separate mirror for the A1/235 quartz lamps. Unfortunately, over time, the mirrors develop problems with their reflective surface. Also, the lamps are now obsolete and when available as new/old stock they can be quite expensive.

The answer is to have a conversion to use the readily available A1/259 (ELC) lamp. These are also reasonably priced and can be obtained from many sources.

I have just collected two such models from Kevin Brown of Nottingham who has done a superb job of the conversion. The old mirror has gone, as has the old lamp holder. The original "pull down" lamp assembly has been modified with a new lamp holder with catches to securely locate the ELC lamp. The electrical connection is by a new flying lead terminating in a 2-pin ceramic connector.

The best model for the conversion is the one with the two position lamp switch as this allows a longer lamp life on the lower setting.

Kevin has obviously put a lot of thought, and work, into making the conversion and I can thoroughly recommend any TQI owner to consider such a conversion. Also, of course, whilst with Kevin the projector will have a general check-over to ensure a further long life.

In my case, a lot of other work, including new worms, has really rejuvenated my projectors.

Thank you, Kevin.
 
Posted by David Guest (Member # 2791) on October 29, 2018, 12:25 PM:
 
I have been converting the tq1 range for over 10 years to take the a1 259 lamp I also have brand new mirrors in stock should you want to keep your projecter original lamp a1 235 which I also have these in stock I have lots of spares for these as my father bought loads of spares when bell and howell seized trading
 
Posted by David Skillern (Member # 607) on October 30, 2018, 08:49 AM:
 
Hi David,

I could do with a brand new mirror for my TQ1 - can you bring some to Blackpool ?
 
Posted by David Guest (Member # 2791) on October 30, 2018, 02:50 PM:
 
yes will bring it with your features just jog my memory 3 days before
 
Posted by David Skillern (Member # 607) on October 31, 2018, 06:43 AM:
 
Will do

Cheers
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2