This is topic B&H selecta frame help in forum 16mm Forum at 8mm Forum.

To visit this topic, use this URL:;f=5;t=001970

Posted by Barry Webb (Member # 1897) on April 16, 2019, 09:01 AM:
Hi im working on a B&H selecta frame 5 machine so far ive got it to run forward and backwards after cleaning all the contacts on all the pin plugs and sockects.
now the problem is i dont seem to get any frame pause or slow advance and cant seem to download any service manual any tips would be much deprecated.
Posted by Maurice Leakey (Member # 916) on April 16, 2019, 03:17 PM:
I can't really help you.
I've found the following picture. It certainly seems that it started out as a Bell & Howell TQIII and was either built for the Visual Instrumentation Corporation or perhaps they bought the basic projector and altered it themselves.
As time has passed it does not seem that the Internet is going to help, unless perhaps a fellow member has a similar model.

Visit for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation