This is topic 35mm projector Zeiss TK35 in forum 16mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=002041

Posted by Pierre Mdihi (Member # 6808) on November 07, 2019, 09:20 AM:
 
Hi everyone,

I know it's not the right place for this topic but i haven't found where I can post my question.

This Week-end i'm going to see someone who sell a 35mm projector a Zeiss TK35. This projector have been modified to work at 220V and have a laser reader to be able to read recent movie. The projector is suppose to be complet and fully working.

He sell this projector with 3 lens with (one anamorphic), a scotch splicer, the tripod, three new lamp, and rewinding arm.

The price 500€ (550$).

Does somebody have this kind of projector and what do you think about this ?

I'm asking because it's very difficult to have information in french or English).
 
Posted by Nantawat Kittiwarakul (Member # 6050) on November 07, 2019, 07:32 PM:
 
While I don't have direct experience with this particular ones, but had once owned the Russian clone of this projector (and a few more 35mm projectors [Wink] )

While the price seems about right, but you'll have typical restrictions&quirks of most portable projectors. Being portables you'll usually have to trade it with robustness/sturdiness. In some machine (possibly this one) that would include worse film handling, too.
(That roller framing is the film killer, bet on that.)

For casual use and simplicity this might be a good deal. But if you don't mind massive footprint (or no space restriction) you may try looking for full-size machine instead. For roughly the same cost the full-size ones will simply outperform most if not all portables.
 
Posted by Pierre Mdihi (Member # 6808) on November 08, 2019, 02:30 AM:
 
Thanks you Nantawat for your response. At first, i was thinking it's was a good apportunitie but not anymore. I have been told thats it's fragile, the lamp is weak and the the roller framing not very kind with movie.
I will continue to look around if there is something better.
 
Posted by Nantawat Kittiwarakul (Member # 6050) on November 08, 2019, 09:46 PM:
 
This is a Japanese-made Tokiwa T60 portable projector which once was very popular in my country for outdoor cinema show business due to its portability/simplicity/ruggedness.

 -

But as you can see, this beast uses the same roller framing principle as those TK35. And boy, it LOVES to chew the film. [Eek!] Any less than perfect splice? - then say good-bye. And don't even think about running brittle/shrunken acetate print through this little devil, just plain impossible.

Moreover, the lower roller was set, the worse film handling it would be since the film will have to make a sharper turn around the darn roller. Imagine driving your car at full speed into 4m roundabout and expecting good, smooth ride. [Roll Eyes]

I bet that this disadvantage does apply to TK35 too. No doubt about that.
 
Posted by Pierre Mdihi (Member # 6808) on November 10, 2019, 01:16 PM:
 
Desipite the nice disign the only good point seems to be the portability. Thank you for your expertise.
 
Posted by Dominique De Bast (Member # 3798) on November 10, 2019, 01:37 PM:
 
Pierre, keep in mind that you need a lot of space to store 35 mm films.
 
Posted by Mark Todd (Member # 96) on November 13, 2019, 03:43 PM:
 
Blimey I struggle with 16mm and only have about 20 shorts and some trailers. !!!

I`d have a long hard think Pierre.

Best Mark.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2