This is topic 16mm film retaining clips in forum 16mm equipment for sale/trade at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=7;t=000067
Posted by David Pannell (Member # 300) on February 14, 2007, 04:33 AM:
Hi,
Does anyone know where I can purchase a quantity of those little plastic clips which fit over the end of the film when on a reel, to stop the film unravelling - similar to the 8mm ones - or any similar device?
Not sure of the actual name for these little devices, but I hope the title and content of this thread is an adequate description.
(I shall also need some similar devices for 8mm).
Thanks,
Posted by Steven Sigel (Member # 21) on February 15, 2007, 01:56 PM:
I've never seen such a thing for 16mm. They did have some cardboard straps that circled around the print - but they're not easy to find.
What I do is use artist's paper tape to tape down the end of the film. It holds well, but peels off with no residue.
Also - buy a roll of leader and make sure that all of your prints have good long leaders...
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2