This is topic Bolex 16mm splicer in forum 16mm equipment for sale/trade at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=7;t=001007
Posted by Luigi Castellitto (Member # 3759) on August 30, 2018, 11:32 AM:
I'm looking for a Bolex 16mm splicer.
A moderate price!
Posted by Kevin Clark (Member # 211) on August 30, 2018, 02:20 PM:
Hello Luigi
Is it the Bolex 16mm bevel edged cement splicer you are looking for? If yes I have one and will sell it for £15 plus postage extra.
Please let me know either way.
Kevin.
Posted by Luigi Castellitto (Member # 3759) on August 30, 2018, 02:26 PM:
Hello Kevin,
this version:
http://www.bolexcollector.com/accessories/edit60.html
Is it the one you have?
Posted by Kevin Clark (Member # 211) on August 30, 2018, 02:29 PM:
Yes I'm sure it is - can you give me an hour or so then I will take a picture and upload it so you can see the actual splicer I have?
Kevin
Posted by Luigi Castellitto (Member # 3759) on August 30, 2018, 03:45 PM:
Sure.
Can you also check that it's working? Thank you!
Posted by Kevin Clark (Member # 211) on August 30, 2018, 03:48 PM:
Hello Luigi
Here are two pictures of my Bolex 16mm splicer - it is the same model as pictured in your link.
It is complete and I'm sure it is working but will try it out in the morning just to be 100% certain.
I also have two of their Super 8 / Std 8mm ones to sell too.
Kevin
Posted by Luigi Castellitto (Member # 3759) on August 30, 2018, 05:28 PM:
Thanks, Kevin, it's it, it's OK for me. If you want to do the test, tomorrow or when you want, it's a kindness for which I'm grateful.
When you want, you also tell me the total to pay (I'm in Italy) and even if you can do it with Paypal.
I send you a private message.
I already have the Std 8/Super 8 version, so I was looking for the 16mm version, because I think it's a very good splicing machine.
Posted by Kevin Clark (Member # 211) on August 31, 2018, 06:28 AM:
All tested this morning and it works fine Luigi - I'll reply by PM message with my details and yes please payment by PayPal will be perfect.
Kevin.
Posted by Luigi Castellitto (Member # 3759) on August 31, 2018, 09:21 AM:
Hello Kevin, thank you for the test and kindness!
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2