This is topic Projector Servicing in forum General Yak at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=8;t=001487
Posted by Maurice Leakey (Member # 916) on November 12, 2009, 05:26 AM:
Does your Bell & Howell need a need worm? Does your GS-1200 need attention?
My trusted service engineer, Kevin Brown of Nottingham, now has a website.
Check it out at http://www.kb-electronics.co.uk and see how many pieces come out of a Bell & Howell!
Kevin has just made a replacement part for the GS-1200 sound roller pressure pad assembly, see this item and the old faulty part which he removed from one of my Elmos.
Kevin has been servicing my Super 8 and 16mm projectors for many years and I can thoroughly recommend him.
Posted by Steven J Kirk (Member # 1135) on November 12, 2009, 12:51 PM:
An excellent link and already on my Favorites list for future reference!
Posted by Michael O'Regan (Member # 938) on November 13, 2009, 04:23 PM:
I emailed him for some info but have had no reply. Irritating.
Posted by Maurice Leakey (Member # 916) on November 15, 2009, 02:22 AM:
Kevin's new email reply system may not have been set up at that time. I believe it's now up and running.
Why not 'phone him? He will be pleased to talk to you.
Posted by Michael O'Regan (Member # 938) on November 15, 2009, 02:24 AM:
Kevin contacted me. Thanks.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2