This is topic Pathescope Ace and material of the film in forum 9.5mm Forum at 8mm Forum.


To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=9;t=000318

Posted by Luigi Castellitto (Member # 3759) on November 06, 2015, 01:08 PM:
 
After years of testing I realized that my Pathescope Ace in very good state, does not have the slightest problem with the triacetate films and with all the old commercial films and other, but with polyester films It does a little 'fatigue!
It does not go very bad, the vision is always enough, but the drag is not the best.
Someone with the Ace has never noticed this thing, or even someone with other projectors? Although it is difficult to understand, the polyester is very rare.
[Smile]
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2