Announcement
Collapse
No announcement yet.
Pathéscope Kid questions
Collapse
X
-
Hi, Chris. The Pathescope "Kid" was ,as its name suggests was aimed at the Juvenile market. It used the same lamp as the original Pathescope Home Movie projector. It was designed to use the films contained in the 30 and 60ft cassettes with "notched " titles. A better version was later marketed called the "Imp" for improved. They were all superseded by the Pathescope Ace, which still used the same 20 volt lamp. The "electric toaster" resistance was soon replaced by a transformer. Thats the history lesson! Now what lamp to use. I suggest you scroll back through past topics and you will see that the best conversion is to use the little 12 volt 10watt Halogen bulbs and transformer. You can obtain the transformer, and lamp holder your local electrical parts shop o DIY store. Do not use any higher wattage bulb or you will damage the film. Ken Finch.
Leave a comment:
-
Here is the Heat & Light Adapter.
Volex V410 Heat and Light switched bayonet adaptor (flameport.com)
Maurice
Leave a comment:
-
Woolworths used to sell an item known as a Heat & Light Socket. It plugged into the room light socket and had two outlets, one was always live (when the room light switch was on, of course), and the other had a sliding switch for the connection an accessory such as an electric fire.
I remember my mother ironing in the centre of the room with the light on to see what she was doing, and with her iron plugged into the switched socket.
Many early home pre-war projectors were supplied with this form of plug.
Maurice
Leave a comment:
-
The wooden plug that you show would have been plugged into an electric light socket. Back in the day there were no wall power sockets so the only power source was a light socket where a light bulb would have been. Normally these plugs would have been made of Bakelite, but wooden ones also were available.
Leave a comment:
-
I believe the lamps are the same as those used in the Pathé Baby projectors. As Maurice says, they are now rare. When they surface, they are very expensive. In the '90s, Muller in Paris had a batch of those lamps manufactured but I don't know how many and anyway they were not cheap, neither.
Leave a comment:
-
Thank you for the link, Maurice. Sorry to hear about Grahame Newnham. Looks like a very detailed page on the Kid Projector. I do have the dropping resistance unit but I'm confused by the wooden plug to supply the power. Has anyone seen these before?
Grahame Newnham Quote
It looks quite straightforward to fit modern QI halogen G4 base lamps like the little 6volt 10watt M29 often used in the Pathé-Baby lamp conversions. Just remember that anything above 10watts will begin to ruin the single frames on the early 'notched' 9./5mm film prints, However there are now LED 'imitations' of this type of lamp - I am waiting to try some......Last edited by Chris Smart; February 04, 2021, 03:50 PM.
Leave a comment:
-
Chris
You may find the following attachment interesting.
Regrettably. Grahame Newnham passed away last year.
In addition to the hand turned projector, there should have been a dropping resistance unit to supply the lamp.
I would suggest that the lamps are now unobtainable as they have been obsolete for many years .
PATHE KID (pathefilm.uk)
Maurice
Leave a comment:
-
Pathéscope Kid questions
Hello!
I'm a regular 8mm collector and shooter normally but I had the opportunity to purchase a Pathéscope Kid projector with a collection of films. I just received it in the mail and noticed the bulb is missing and the power cable connector is wooden with two round metal/brass fittings embeded in the wood. I have no idea how that would work, am I missing a part? Can bulbs still be found for these or is there an alternative one can use? Everything else seems to be in relatively good condition. This auction also included a 1st edition Pathescope Film Catalogue from 1933, an instruction manual with english on one side and Chinese on the other (bad condition), a Pathex cartridge with film that looks almost white inside, I assume its unused but exposed film. Also a neat 3inch slicer with a wood base and an interesting little vice mechanism with notches for the perforations. I've catalogued all the films it came with if anyone is interested.
Cat Number Size of Reel Name Description / Title 799 2.5inch Pathéscope Felix the cat. The Puss for Boots (Red Text) An10.357 2.5inch Pathéscope Stop thief! An10.331 2.5inch Pathéscope Charlie the Watchmaker An10.365 2.5inch Pathéscope For Dolly's smile 10.092 2.5inch Pathéscope N.2. High jinks amoung the Chinks 10.092 2.5inch Baby Film N.1. High jinks amoung the Chinks 493 2inch Baby Film Saint-Malo (Green Label) 10127 2inch Pathéscope Froth and Flurry (Red Text) 10.053 2inch Baby Film Falling Stars 10.057 2inch Baby Film N.1. farina in Hospital 417 2inch Baby Film Lerida (Green Label) An. 802 2inch Pathéscope Felix the protector 10116 2inch Pathéscope Negretina Leads a Simple Life (Red Text) 10116 2inch Pathéscope Negretina Leads a Simple Life 275 2inch Pathé Baby Beaucitron is superstitious Last edited by Chris Smart; February 04, 2021, 03:31 PM.Tags: None
Leave a comment: