Tweet
I was hoping someone may have a spare solid state amplifier board for the above projector. It is a UK spec model 240 mains. I bought it very cheaply off eBay and after a major clean up and plenty of fettling it’s now running sweetly but alas NO sound.
I’ve checked everything as best I can, exciter works fine , I’ve removed the board and cleaned all contacts , all components look good so a new board seems to be the only thing I can think of. Unless anyone could suggest any other things I may have missed.
Thanks John
I’ve checked everything as best I can, exciter works fine , I’ve removed the board and cleaned all contacts , all components look good so a new board seems to be the only thing I can think of. Unless anyone could suggest any other things I may have missed.
Thanks John