Tweet
removing governor on Ampro premier projectors
Hello I am wondering if anyone has any tips on getting the governor off a ampro projector I have two projectors with broken drive belts one is a model 40 and the other is a model 20. in order to change the belt you have to remove the governor. it’s very tight and there isn’t a lot of room to fit tools. when i removed the screws on both projectors but the governors won’t come off the shaft i tried pb blaster with no luck. has anyone found a way to get the governors off? here’s a video of what im trying to accomplish https://youtu.be/hqAAqhySocw?si=uU9ySqi5GXep5Xb_
- Welcome to the new 8mm Forum! The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate. To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above. Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here. Once the registration has been approved, you will be able to login via the link in the upper right corner of this page. Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face. Thank you!