Tweet
I have a Keystone K109 projector that stopped running. I disassembled it to repair a frozen gear and when removing the shutter wheel assembly noticed four holes drilled into the shutter wheel assembly hub that had small metal cylindrical pieces that fell out. I'm guessing they might be small weights but not sure. Does anyone know what these are, how many should the assemble require, and how to arrange the pieces in the hub? I have found five of these cylindrical pieces that fell out (two of the five cylindrical pieces are 3mm long, and the other three are 5mm long and tapered at one end. Any information will help finish getting it back together. Thanks.
- Welcome to the new 8mm Forum! The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate. To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above. Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here. Once the registration has been approved, you will be able to login via the link in the upper right corner of this page. Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face. Thank you!