Paul Adsett
Film God
Posts: 5003
From: USA
Registered: Jun 2003
|
posted September 15, 2016 02:57 PM
Yesterday was a wet day, so I finally got around to installing a new rocker switch in my Eumig 938. This rocker switch switches the main power on and off, and replaces the really nasty sliding mains switch, which for me has failed on every 900 series projector that I have owned.
To install the switch I had to drill an 11/16 hole through the metal back wall of the chassis, and re-route the power wires over the top of the motor. I installed a power strip to make things easier next time.
--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj
| IP: Logged
|
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
