8mm Forum: Elmo Rewind Arms- A question

»	8mm Forum » 8mm Forum » Elmo Rewind Arms- A question

UBBFriend: Email this page to someone!

Author

Topic: Elmo Rewind Arms- A question

Tony Milman
Phenomenal Film Handler

Posts: 1336
From: United Kingdom
Registered: Jun 2003

posted January 18, 2004 07:51 AM

I have been wondering what the threaded hole on the right hand side of the Elmo 1200ft rewind arms is intended to be used for.

There is no bolt in either hole but the recess is threaded as if to accept one

Anyone have an idea?

Thanks

Tony

--------------------
Tony

| IP: Logged

Chris Quinn
Master Film Handler

Posts: 372
From: England, Bedfordshire.
Registered: Nov 2003

posted January 18, 2004 10:10 AM

Hi Tony,
This is just where the grub screw is fitted, undo and you can remove the shaft that holds the gearing on, is your grub missing??
Chris, [Wink]

--------------------
The other half thinks i'm up to something. Shes right of course.

| IP: Logged

Tony Milman
Phenomenal Film Handler

Posts: 1336
From: United Kingdom
Registered: Jun 2003

posted January 21, 2004 03:50 PM

Chris

What a Dope! Yep, now I shine a torch into the holes I see the grub screws-thanks! oops [Embarrassed]

--------------------
Tony

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2