8mm Forum


Post New Topic  Post A Reply
my profile | my password | register | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Sankyo Sound 600 Electrical Damage

 - UBBFriend: Email this page to someone!    
Author Topic: Sankyo Sound 600 Electrical Damage
Manar El Harake
Junior
Posts: 2
From: Beirut, Lebanon
Registered: Apr 2019


 - posted April 11, 2019 03:28 AM      Profile for Manar El Harake     Send New Private Message       Edit/Delete Post 
Hello Everyone, I am from lebanon and we have electricity of 220V, the Sankyo Sound 600 was plugged into power with 110v configuration. it turned on for seconds then off forever. Do u have any instructions on how to troubleshoot and fix? thank you everyone.

 |  IP: Logged

Brian Fretwell
Phenomenal Film Handler

Posts: 1723
From: London, UK
Registered: Jun 2014


 - posted April 11, 2019 10:50 AM      Profile for Brian Fretwell   Email Brian Fretwell   Send New Private Message       Edit/Delete Post 
I don't know this machine, but as a general rule I'd start with any internal fuses and hoe that they have blown fast and protected the rest of the electric/electronics.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5745
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted April 11, 2019 11:19 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Manar
Here is a photo with the back off. There do not seem to be any fuses.
If not, there could be serious trouble like burning out the transformer.
Take the back off and have a look to see if anything has burnt out.

https://www.van-eck.net/img/itable/images/film_148_Sound%20600_1483954300331.jpg

--------------------
Maurice

 |  IP: Logged

Leonard Goss
Junior
Posts: 22
From: Launceston, Cornwall, UK.
Registered: Jul 2012


 - posted April 12, 2019 11:11 AM      Profile for Leonard Goss   Email Leonard Goss   Send New Private Message       Edit/Delete Post 
Maybe there are fuses on the back side of the power board? I would take it off and have a look.

--------------------
A fan of 8mm movies since the mid 1960s and still as keen as ever!

 |  IP: Logged

Janice Glesser
Film Goddess

Posts: 3383
From: Sunnyvale, CA USA
Registered: Sep 2011


 - posted April 12, 2019 07:12 PM      Profile for Janice Glesser   Email Janice Glesser   Send New Private Message       Edit/Delete Post 
There are no fuses on the back or front side of the power board. On the back is a heat shield and a power transistor that probably blew along with other components when over loaded. I recommend you take a look at my thread where I repaired my Sankyo 600 of multiple issues. It will give you some direction on how to troubleshoot.

http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009970

I recommend you get out your multimeter and start testing. [Smile]

Good luck!

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

 |  IP: Logged



All times are Central  
Post New Topic  Post A Reply Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2