8mm Forum


Post New Topic  Post A Reply
my profile | my password | register | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm equipment for sale/trade   » Cir or similar type splicer for standard *mm wanted will trade for super 8

 - UBBFriend: Email this page to someone!    
Author Topic: Cir or similar type splicer for standard *mm wanted will trade for super 8
Kenneth DePriest Jr
Film Handler

Posts: 64
From: severn MD
Registered: Aug 2012


 - posted November 11, 2017 08:36 PM      Profile for Kenneth DePriest Jr   Email Kenneth DePriest Jr   Send New Private Message       Edit/Delete Post 
so I accidentally bought TWO ciro deluxe metal splicers, one I have says "super 8" and it is. I have sone that just says "8mm" and while getting frustraited that the Standard 8 film wouldnt fit on the sprocket area, I then discovered it is actually a super 8 splicer that does not mention that fact on the label area. one of the hold down arms is missing but the splicer still works perfectly as long as you are using super 8 film. I have another that I bought for 16mm but it looks like the super 8 one but the matrix is 16mm wide. since it is a wrap around splicer you cannot use it for standard 8. let me know if you have one or wanna stade for a super * ciro. thanks!

 |  IP: Logged

Kevin Hassall
Master Film Handler

Posts: 438
From: Walsall, England
Registered: Dec 2010


 - posted November 12, 2017 02:48 AM      Profile for Kevin Hassall   Author's Homepage   Email Kevin Hassall   Send New Private Message       Edit/Delete Post 
I think Barry at indi8 has one buddy .

 |  IP: Logged

Chip Gelmini
Phenomenal Film Handler

Posts: 1682
From: Brooksville, FL
Registered: Jun 2003


 - posted November 12, 2017 05:22 AM      Profile for Chip Gelmini   Email Chip Gelmini   Send New Private Message       Edit/Delete Post 
Is the one with the 16mm matrix labeled "m3 special? If yes I might be interested in buying it let me know

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5735
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted November 12, 2017 09:58 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Independent 8 have two CIR tape splicers for sale.
One is for Super 8, and the other is for standard 8.
http://www.bfcc.biz/independent8equipment.html

--------------------
Maurice

 |  IP: Logged

Kenneth DePriest Jr
Film Handler

Posts: 64
From: severn MD
Registered: Aug 2012


 - posted November 12, 2017 12:59 PM      Profile for Kenneth DePriest Jr   Email Kenneth DePriest Jr   Send New Private Message       Edit/Delete Post 
Thanks a ton fellow film people I just wrote indi 8 I had found the actual CIR website. and they required a bank transfer for payment and I didnt feel comfortable doing that. Chip, it doesn't say that on the matrix, but it is for sale if someone needs a Metal super 8 ciro. They really are the best splicer I have used and all projectors seem to like splices made with them.

 |  IP: Logged

Janice Glesser
Film Goddess

Posts: 3375
From: Sunnyvale, CA USA
Registered: Sep 2011


 - posted November 12, 2017 03:38 PM      Profile for Janice Glesser   Email Janice Glesser   Send New Private Message       Edit/Delete Post 
Kenneth...I bought my standard 8mm cir splicer for Ewan Colsell. He has Super 8 and Standard in both metal and plastic.

https://sites.google.com/site/cirsplicers/

Payment was simple thru PayPal.

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

 |  IP: Logged



All times are Central  
Post New Topic  Post A Reply Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2