8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm equipment for sale/trade   » Wanted 16mm CIR splicer

 - UBBFriend: Email this page to someone!    
Author Topic: Wanted 16mm CIR splicer
Barry Attwood
Phenomenal Film Handler

Posts: 1411
From: Enfield, U.K.
Registered: Aug 2003


 - posted September 15, 2019 04:59 AM      Profile for Barry Attwood   Email Barry Attwood   Send New Private Message       Edit/Delete Post 
I've had in a little bit of 16mm, and I need to split a couple of L&H shorts, but I haven't got a 16mm splicer, so if anyone has one for sale at a reasonable price, I'd be interested. You can PM me or send me an email to indi8films@aol.com .

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted September 16, 2019 02:39 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Barry
Unless you are going into 16mm in a big way a CIR tape splicer is going to be expensive. even for the smaller version (on eBay at present at £41 with 9 bids and still 6 days to go).
I suggest you buy a cement splicer. It will probably do most of what you want to do. As regards polyester film, which will not accent cement splices, there is very little of this about as only in the later years did polyester get used.
Here is a charming cement splicer for £17.99 (post free) which is described as '3-way' as it will accept standard 8, Super 8, and 16mm. It seems a good proposition. Cement is still readily available.
https://www.ebay.co.uk/itm/LPL-Cement-Super-8-and-8mm-Film-Splicer-SW8C-2/352746631125?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3D046834b4a2af4 ec3b1435ea358c7262f%26pid%3D100005%26rk%3D1%26rkt%3D12%26sd%3D133161276309%26itm%3D352746631125%26pmt%3D1%26noa%3D0%26pg%3D2047675&_trksid=p2047675.c100005.m1851

--------------------
Maurice

 |  IP: Logged

Ricky Daniels
Jedi Master Film Handler

Posts: 587
From: London & Kent UK
Registered: Jul 2003


 - posted September 16, 2019 04:38 AM      Profile for Ricky Daniels     Send New Private Message       Edit/Delete Post 
Hi Barry,
Hope you’re settling into your new gaff okay?
I’ve a few CIR splicers listed here if you’re interested...

http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=7;t=001091

I’ve also a 16mm Gang Synchroniser if anyone’s looking for one too?

Best,
Rick

 |  IP: Logged

Barry Attwood
Phenomenal Film Handler

Posts: 1411
From: Enfield, U.K.
Registered: Aug 2003


 - posted September 16, 2019 04:39 AM      Profile for Barry Attwood   Email Barry Attwood   Send New Private Message       Edit/Delete Post 
Maurice,

I could never get the hang of a cement splicer, 8 or 16mm, I'll just have to wait until I come across something, or I'll have to sell the 2 L&H shorts together on one reel, but there's no rush at all, as I can't do much until I get my new Film Storage unit up and running (being erected on the 30th Sep).

 |  IP: Logged

Joe Taffis
Phenomenal Film Handler

Posts: 1592
From: United States
Registered: Jun 2003


 - posted September 16, 2019 12:01 PM      Profile for Joe Taffis   Email Joe Taffis   Send New Private Message       Edit/Delete Post 
Hello Barry, since I don't do a heck of a lot of 16mm splicing, the Craig Master Six is inexpensive and works great for either tape or cement splices. I use the Kodak 16mm presstapes. If you buy any, just make sure they're fresh and not old stock [Wink]

--------------------
Joe Taffis

 |  IP: Logged

Barry Attwood
Phenomenal Film Handler

Posts: 1411
From: Enfield, U.K.
Registered: Aug 2003


 - posted September 17, 2019 12:27 AM      Profile for Barry Attwood   Email Barry Attwood   Send New Private Message       Edit/Delete Post 
Not such a rush now as I sold the 2 L&H's together on the one reel, but if I come across a reasonably priced CIR splicer I'll buy it for the future. Ricky thanks for the offer, but the amount of use I'd get I could not justify paying over £100 for a splicer, but thanks for the offer.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted September 17, 2019 04:19 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Well done, Barry. That's another problem solved. [Big Grin]
I still think you should have a go at the cement splicer which I gave you details about. It's very easy to use, and far, far, cheaper than buying a used (or even new) CIR. Also, it can be used with Kodak presstapes, these are double perforated and as they are transparent they are quite acceptable for 16mm sound films.
https://shop.van-eck.net/SF-0013.html
I have the very same LPL splicer. It's Japanese and very good quality.

[ September 17, 2019, 11:22 AM: Message edited by: Maurice Leakey ]

--------------------
Maurice

 |  IP: Logged

Ricky Daniels
Jedi Master Film Handler

Posts: 587
From: London & Kent UK
Registered: Jul 2003


 - posted September 17, 2019 01:15 PM      Profile for Ricky Daniels     Send New Private Message       Edit/Delete Post 
Hey Barry,
Understood, there’s no point if you’re not doing a lot of 16mm, and you’re welcome all the same. Best not look at the price of a new one btw! 😂
Best,
Rick

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2