Posts: 96
From: Athens, Greece
Registered: Jan 2011
posted February 20, 2011 08:45 AM
Hello friends,
today I found a nice and cheap editor. The Bolex V180 duo It seems complete, from what i've seen in the net, it misses only the black plastic cover above the lamp, I hope that it didn't include any necessary parts.
So, i've tested it and it seems to work great, however I cannnot seem to find how to adjust the frame (move the frame up or down).
Anyone happens to know or better anyone has the manual?
Posts: 1592
From: United States
Registered: Jun 2003
posted February 20, 2011 08:58 AM
This editor looks similar to my HANIMEX E310. Try pushing the button on the sprocket wheel in and hold, pull the film until you get the frame right on the screen, then release the button
Posts: 96
From: Athens, Greece
Registered: Jan 2011
posted February 20, 2011 10:00 AM
Many many thanks Joe!!! Problem solved!
I had played a bit with the sprocket assembly before I asked, but the button was hard to push and I thought it was just a handle for the sprocket wheel
Posts: 96
From: Athens, Greece
Registered: Jan 2011
posted February 20, 2011 01:48 PM
Bryan i'm probably not the best person to comment on that, since its the first editor i'm using, but under my inexperienced eyes, the editor has a very good image.
The screen is rather big, comparing to most editors i've seen, and the picture is clear and brightly enough. I'm quite happy with the result