8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Elmo FP-C

 - UBBFriend: Email this page to someone!    
Author Topic: Elmo FP-C
Todd Silk
Junior
Posts: 2
From: Hayden, ID, USA
Registered: Oct 2019


 - posted October 18, 2019 09:38 AM      Profile for Todd Silk   Email Todd Silk   Send New Private Message       Edit/Delete Post 
I'm looking for a wiring diagram for a Elmo FP-C projector or any suggestions on what to check. The little pilot light comes on behind the indicator that shows the film selected. However the main lamp or the motor does not turn on. Any ideas?

Todd

 |  IP: Logged

Todd Silk
Junior
Posts: 2
From: Hayden, ID, USA
Registered: Oct 2019


 - posted October 22, 2019 07:27 AM      Profile for Todd Silk   Email Todd Silk   Send New Private Message       Edit/Delete Post 
Found the problem. Lamp not turning on was because it has a lockout when it is in threading mode. The second problem was a broken wire on the speed control reostat.

Everything works now

 |  IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011


 - posted October 22, 2019 12:00 PM      Profile for Janice Glesser   Email Janice Glesser   Send New Private Message       Edit/Delete Post 
Way to go Todd. Enjoy your films!

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2