8mm Forum


Post New Topic  Post A Reply
my profile | my password | register | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Elmo FP-C - Spindle Question

 - UBBFriend: Email this page to someone!    
Author Topic: Elmo FP-C - Spindle Question
John Berman
Junior
Posts: 4
From: London, UK
Registered: Dec 2018


 - posted December 23, 2018 01:28 PM      Profile for John Berman   Email John Berman   Send New Private Message       Edit/Delete Post 
Hi
Hope this is not a silly question. I picked up from a second hand shop a film which has Super 8mm on the box, the reel will not fit on the spindle on the projector - am i missing something obvious ?
 -

Regards

John B

--------------------
Regards
John Berman

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5745
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted December 23, 2018 02:41 PM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
John
The Elmo FP-C is a dual-gauge projector, but I assume the spool spindles are only for standard 8.
Therefore you need these spool adapters.

https://www.ebay.co.uk/itm/ADAPTER-FILM-REEL-ADAPTER-MOVIE-REEL-AD APTER-SUPER-8-TO-8MM-ADAPTER-/152136650133

--------------------
Maurice

 |  IP: Logged

Janice Glesser
Film Goddess

Posts: 3383
From: Sunnyvale, CA USA
Registered: Sep 2011


 - posted December 23, 2018 09:25 PM      Profile for Janice Glesser   Email Janice Glesser   Send New Private Message       Edit/Delete Post 
The supply reel arm on the FP-C has a dual format spindle that handles both Super 8 and Std. 8 reels with no adapter. I can't tell from the pic...but that reel might be an audio reel. I would transfer the film to another reel.

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

 |  IP: Logged



All times are Central  
Post New Topic  Post A Reply Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2