Scott Balko
Junior Posts: 3
From: Redwood Falls, Mn USA
Registered: Nov 2005
posted November 05, 2005 07:43 PM
I need the three idler gears in the take up arm for a Eumig 820. My son was messing with the projector and the gears "mysteriously" disappeared.
Posts: 978
From: Bapchild, Kent, UK
Registered: May 2004
posted November 12, 2005 02:19 PM
Scott I have a partially stripped Eumig 802 I have used for various spares and as far as I can recall it still has the take up and feed arms fitted. If you stil need the gears let me know and I can send them out to you. Kevin
posted November 17, 2005 10:45 AM
Kevin, If Scott doesn't need them anymore I'll take them! I have an Eumig 807 with the same problem. So, if these are still available please send me a PM.
Posts: 978
From: Bapchild, Kent, UK
Registered: May 2004
posted November 18, 2005 05:13 PM
Hello George Scott has responded via PM to my original reply post and my gears are about to be posted to him, however I'm pleased to see Kev Faulkner may be able to help you so hopefully all will be OK with your machine soon. I'm pleased I kept this model for parts as it has been a useful doner for about four other Eumigs to date. Kevin
posted November 19, 2005 11:12 AM
Thank you Kevin That would be great. Right now the projector has a thin belt instead of the gears. A custom job made by me , it works, but not perfectly. Therefore the gears are more than welcome. I'll PM you for the details. Thanks again!