This is topic Bolex/Paillard G916 spares in forum 9.5mm for sale/trade/wanted at 8mm Forum.

To visit this topic, use this URL:;f=10;t=000056

Posted by Brian Collins (Member # 761) on April 04, 2012, 04:29 PM:
I have a Bolex/Paillard G916 that has had the resistance knob and the adjuster in the lamphouse removed for some reason and am looking to purchase spare parts or complete machine for spares to put this right as without it I have no control over the ampmeter, any help would be appreciated, also require a transformer for it.
Posted by Peter James Diggle (Member # 1533) on April 09, 2012, 10:06 AM:
A friend has a PB G16 which has an electrical fault which he wants to dipose of. He is happy to be contacted on Oxford 01865 510294. Hope you are able to help each other with this.His name is Kumar Hussein.
Posted by Brian Collins (Member # 761) on April 16, 2012, 02:56 AM:
Thank you Peter, Have been in touch with Kumar and will be seeing him later, best regards.
Posted by Alwyn Jones (Member # 3062) on May 03, 2012, 09:00 AM:
I have aquired a Bolex G3 needing 16mm/8mm bits. Now runs 9.5mm but with Dallmeyer projection lens which is only suitable for 8mm. Should your newly aquired projector have a 16mm suitable lens and/or sprockets/gate etc - spare & surplus to your requirements, I would be interested in a purchase.
Posted by Brian Collins (Member # 761) on May 03, 2012, 10:43 AM:
Mine is also a G916 and it hase a Dallmeyer f50 lens but will see what the other one I am obtaining shortly is and will keep in touch.
Posted by Alwyn Jones (Member # 3062) on May 03, 2012, 11:20 AM:
Much obliged, Brian. Missed an 8/16 - sold as faulty - on ebay last week, would have been perfect for my missing bits.
Many thanks, sorry for being cheeky - if you don't ask, you don't get.
Posted by Brian Collins (Member # 761) on May 03, 2012, 11:33 AM:
Yes. That 816 was good as it had the complete set of change overs and gate, if I had not made a promise on another one I would have been tempted. Never mind something else will come along.

Visit for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation