8mm Forum: Wanted: front foot for elmo 16cl

This is topic Wanted: front foot for elmo 16cl in forum 16mm equipment for sale/trade at 8mm Forum.

To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=7;t=000883

Posted by Stuart Reid (Member # 1460) on March 13, 2017, 08:37 AM:

As per title, looking for a front foot for an Elmo 16cl. Thanks.

Posted by Richard C Patchett (Member # 974) on March 13, 2017, 08:58 AM:

Greetings
I have this on my web site (new)
P 412153B Front Leg $15.00
Plus many more Elmo Parts
RC

Posted by Janice Glesser (Member # 2758) on March 13, 2017, 01:35 PM:

Hi Stuart...Obtaining the front leveling foot might be easier than the actual installation... at least it was for me. I couldn't figure out how to remove the stop pin from the screw. The front foot on my 16CL had one of the turning knobs broken off. I was able to glue it back on and it's still holding strongly...but I still would like to replace it.

http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=5;t=001332

If you succeed in replacing the foot ... please post some pics and a description of how you removed the pin. I'm sure there is an easy way that is just not obvious to me. [Smile]

Thanks.

Posted by Stuart Reid (Member # 1460) on March 14, 2017, 03:45 PM:

Richard, thank you. I did look at purchasing the part from you but unfortunately the calculated shipping costs to the UK were almost double the price of the foot!

Janice, I'll look closely at what needs to be done when I get a spare. Hope i can be be of help.

Posted by David Guest (Member # 2791) on March 14, 2017, 07:16 PM:

I have a very nice elmo cl xenon fully serviced for sale

Posted by Janice Glesser (Member # 2758) on March 14, 2017, 09:59 PM:

David...I think Stuart only needs a leveling foot [Roll Eyes]

So you might want to post your projector in the "For Sale" forum with a price.

UBB.classic^TM 6.3.1.2