This is topic Pathescope Ace belt of motor in forum 9.5mm Forum at 8mm Forum.


To visit this topic, use this URL:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=9;t=000476

Posted by Luigi Castellitto (Member # 3759) on November 21, 2018, 02:55 PM:
 
As I said here:
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=10;t=000161
I look for motor belt of Pathescope Ace.
I could find one of the same size, but my belt is too deformed, I can't take the exact measurements: does anyone know them?
Maybe another projector, perhaps of the same Pathé, has the same belt, or maybe another model.
Thank you. [Smile]
 
Posted by Ken Finch (Member # 2768) on November 25, 2018, 08:54 AM:
 
Ace motor belt diameter = 5" or 2.5 to 3cms. Ken Finch.
 
Posted by Luigi Castellitto (Member # 3759) on November 25, 2018, 06:13 PM:
 
Thanks, Ken. A few days ago I ordered a pair of o-rings (paid very little) of the right size. I noticed that the original Pathescope Ace motor belt was square form, but I don't think there are problems with the round ones.
 


Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2010 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2