8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » just got a eumig 802 D projector have a lens question

 - UBBFriend: Email this page to someone!    
Author Topic: just got a eumig 802 D projector have a lens question
Eric Baucher
Expert Film Handler

Posts: 143
From: MD
Registered: Apr 2007


 - posted November 19, 2007 08:25 PM      Profile for Eric Baucher   Author's Homepage   Email Eric Baucher   Send New Private Message       Edit/Delete Post 
will the eumig 1.2 Suprogon lens from an 824 fit onto an 802 D? the 802 is a nice little projector. just thought it might look better with a lens upgrade. Mine has the 1.6 common to this projector, I know there is also a 1.3. any info would be helpful.

 |  IP: Logged

Stephen Spicer
Junior
Posts: 4
From: BATH, UK
Registered: Nov 2007


 - posted November 21, 2007 02:09 PM      Profile for Stephen Spicer   Email Stephen Spicer   Send New Private Message       Edit/Delete Post 
Just about any Eumig lens will fit any moderately modern other Eumig- or for that matter a lot of other projectors as well. Near the end most were using the same barrel diameter - although you may find that focussing knobs don't always engage.

SS

 |  IP: Logged

David Roberts
Master Film Handler

Posts: 405
From: Suffolk. England
Registered: Apr 2004


 - posted November 25, 2007 12:18 PM      Profile for David Roberts     Send New Private Message       Edit/Delete Post 
the suprogon from your 824 will fit any of the 800 series,and is a much better lens than the slower ones. brighter too and a bigger picture for any given throw.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2