8mm Forum: Repair an Eumig C3

»	8mm Forum » 8mm Forum » Repair an Eumig C3

UBBFriend: Email this page to someone!

Author

Topic: Repair an Eumig C3

Juan Bonet
Junior
Posts: 4
From: Barcelona/Spain
Registered: Mar 2007

posted March 23, 2007 12:02 PM

I have an Eumig C3 but the charge is broken.
I want repair it but I can not take off the mechanism.
I unscrew the four screws that I have marked in the picture, but there is something does not allow to remove it me.
http://img390.imageshack.us/img390/1781/eumigtornillosgr1.jpg
How I can disassemble it?
I have repaired all my cameras, but I cannot repair this.
Thaks.

| IP: Logged

John Clancy
Phenomenal Film Handler

Posts: 1954
From: Cornwall
Registered: Jun 2003

posted March 24, 2007 03:40 AM

I believe Bolex still repair all Eumig cameras and projectors at their factory so if you don't crack it yourself all is not lost.

Hopefully someone on here may be able to point you in the right direction. If not, there is the 8mm film makers forum which is extremely active.

--------------------
British Film Collectors Convention home page www.bfcc.biz. The site is for the whole of the film collecting hobby and not just the BFCC.

| IP: Logged

Joerg Polzfusz
Jedi Master Film Handler

Posts: 815
From: Berlin, Germany, Europe, Earth, Solar System
Registered: Apr 2006

posted March 26, 2007 06:14 AM

Hi!

You might want to also try the Filmshooting forum since there are many posters that claim to repair their cameras by themselves.

Hope this helps,
Jörg

| IP: Logged

Juan Bonet
Junior
Posts: 4
From: Barcelona/Spain
Registered: Mar 2007

posted March 27, 2007 03:01 AM

Thanks to all!

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2