Author
|
Topic: speed adjusting on Sankyo 502
|
Ugo Bo
Junior
Posts: 3
From: Bra, CN, Italy
Registered: Mar 2009
|
posted March 14, 2009 03:30 PM
Hello to everybody. I'm new on this forum, though I've been looking here for quite a long time and I found some for very useful tips.
Now It's the first time I write and I'm already here to ask for a suggestion about an easy way to adjust speed on my "new" Sankyo Sound 502.
As many of you know this machine is capable of being speed adjusted by means of the two small pots placed on the electronic board.
Unfortunately these pots are very difficult to access: or you remove the whole transformer, or you must use a very long screwdriver, but still there's a very difficult access, and you must work with the screwdriver blade at an angle with the pot, so it is not so handy to do, especially while the machine is running.
I would like to have the capability of easily adjusting the speed while the machine is running by mean of an external pot, but I don't dare to touch anything on the electronic board, so I wonder if it would work just by putting a variable resistor on one of the two wires that run from the electronic board to the motor...
Any suggestion? Thanks, Ugo
| IP: Logged
|
|
|
|
|
|
|