8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Re-recording digest versions

 - UBBFriend: Email this page to someone!    
Author Topic: Re-recording digest versions
Flavio Stabile
Jedi Master Film Handler

Posts: 707
From: Roma, Italia
Registered: Feb 2005


 - posted June 29, 2009 11:09 AM      Profile for Flavio Stabile     Send New Private Message       Edit/Delete Post 
I'm not sure if a thread was already discussed here about this, if yes, sorry, i didn't find it!

My problem is ti prepare a video/audio track taken from a DVD or VHS, imported on my PC and edit it exactly like the Super 8 digest I need to re-record.

I wonder if anyone can suggest the simplest and fastest way to do it and suggest wich editing software to use (Sony Vegas, Adobe Premiere, other...)!

Thanks
Flavio

 |  IP: Logged

Osi Osgood
Film God

Posts: 10204
From: Mountian Home, ID.
Registered: Jul 2005


 - posted June 29, 2009 11:26 AM      Profile for Osi Osgood   Author's Homepage     Send New Private Message       Edit/Delete Post 
I really wish I could help you on this flavio, but best of luck. That takes a skilled hand. I mean, I can personally record whole reels with no editing, but you get into that realm and I'm lost.

What's the digest your wanting to record? Just curious.

--------------------
"All these moments will be lost in time, just like ... tears, in the rain. "

 |  IP: Logged

Flavio Stabile
Jedi Master Film Handler

Posts: 707
From: Roma, Italia
Registered: Feb 2005


 - posted June 29, 2009 11:35 AM      Profile for Flavio Stabile     Send New Private Message       Edit/Delete Post 
Hi Osi,

first of all I need to re-record the edited version of SOUND OF MUSIC ... it is only 3x600!

Then I bought some months ago many T.Hill & B.Spencer comedies (Marketing and UFA releases) in Germany and they are all 3x400.

Obvioulsy I would like to have them in Italian...

Flavio

 |  IP: Logged

Jean-Marc Toussaint
Film God

Posts: 2392
From: France
Registered: Oct 2004


 - posted June 29, 2009 11:40 AM      Profile for Jean-Marc Toussaint   Author's Homepage   Email Jean-Marc Toussaint   Send New Private Message       Edit/Delete Post 
Flavio.

Check my method here.

Equipment has been upgraded, and I use Final Cut Pro (because I use it for work), but the basics stay the same.

I have re-recorded a lot of digests that were only available in Germany for instance.

--------------------
The Grindcave Cinema Website

 |  IP: Logged

Flavio Stabile
Jedi Master Film Handler

Posts: 707
From: Roma, Italia
Registered: Feb 2005


 - posted June 29, 2009 11:57 AM      Profile for Flavio Stabile     Send New Private Message       Edit/Delete Post 
Hello Jean-Marc,

as told before... i didn't find any post on this and I have been denied [Big Grin]

Anyway.. the point on which I would like to have some suggestions is just when you use your NL editing software (now Final Cut Pro...)

How do you have both video and audio tracks visualized and running together in order to remove (cut away) from the long version the parts missing in the digest one?

Flavio

 |  IP: Logged

Jean-Marc Toussaint
Film God

Posts: 2392
From: France
Registered: Oct 2004


 - posted June 30, 2009 01:17 AM      Profile for Jean-Marc Toussaint   Author's Homepage   Email Jean-Marc Toussaint   Send New Private Message       Edit/Delete Post 
Unless you want them to, the editing software do not separate sound from picture. The concept is to re-edit a new version of the film shot by shot, using the super 8 digest as a template. Compare the shots and you'll be able to make the cut to the frame.
I usually isolate one scene in the super 8 version, then isolate same scene in the rip, compare the time codes and start looking where the cuts have been made in the super 8 version and reproduce the cuts in the rip. It's sometimes easy (Marketing digests keep generally the scenes intact) but sometimes very tricky (other companies trim each shot by a few frames in order to save precious seconds). When you get used to it, you can even create overlapping sound effects and fades. For instance, I've put back the legendary "I am you father" line missing from The Empire Strikes Back digest.
It's hard work, very time consuming, requires constant concentration. Just pratice with your NL editing software.

--------------------
The Grindcave Cinema Website

 |  IP: Logged

Maurizio Di Cintio
Jedi Master Film Handler

Posts: 977
From: Ortona, Italy
Registered: Jan 2004


 - posted June 30, 2009 09:19 AM      Profile for Maurizio Di Cintio     Send New Private Message       Edit/Delete Post 
It's in no way a fast task, especially if the digest is short and heavily condensed. It may be so time-consuming that whenever I re-record a digest, I ask the same rate as for a full-length version even if it's much shorter.
That said it doesn't matter so much which editing software you are using: it has to be fast, reliable and with the capability to compare the S/8 version to the video version. I guess all editing SW can do this. I for one feel quite happy with Adobe Premiere.

This is my workflow: I capture the S/8 digest on PC using the Elmo (Crystal Synced @25 fps); the start leader is very important because it contains several cue marks that can be later conveniently use to start the projector automatically when the moment comes to transfer the new audiotrack back to the film.

Once the digest is in the PC, you need a DVD; working on a digest, there is no need to capture the whole film, just the segments you are interested in. It is important to capture both image and sound because a visual reference can be most useful in several cases.

Next step is to assemble all this footage in the right order, trimming start and end of each scene. Each cut must match precisely the cut on the S/8 print: I usually work with the S/8 scene and the one from the DVD side by side on the timeline (like Jean suggested), and each of them share 1/4 of the monitoring area on the NLE SW. This way possible mistakes become apparent immediately. While assembling the visuals, you automatically assemble the soundtrack too. At the end of the process, though, you might incur in a very short clicking noise at each cut. To overcome this, you prolonge head and tail of each assembled sound element by 2 frames, and divide the souond on two separate soundtracks (A/B roll-style) so that at the start/end of each segment, the sounds overlap for a fraction of a second: this permits to apply a fast fade-out/fade-in on the overlapping sounds which smoothens the result perfectly and sound becomes amazingly good and virtually seamless.

When you are satisfied with the results, you have to put a beep sound, a 1/25 of a second, on one of those numbers in the leader. I usually put this sound reference on cue mark No 10 or 9, so there is enough leader yet for the projector to stabilize speed.

Finally the asseembled sound-digest is transferred onto a DVD and ready we are for the final transfer to S/8. Here "Pedro's" Sync-box comes in handy again in that you stop the projector on the same leader cue mark as that with the beep. Then put the whole set up in stand-by mode (Pedro's box overrides the Elmo GS 1200 motor controls). Now it's the time to start plyback the DVD. When the beep is heard, this signal running into Pedro's box, causes to start the projector which starts to record immediately. From that moment on, if everything has been done as it should be, sound and pictures will run in perfect sync till the end of the digest.

If you need more info, email me at: maurizio (underscore) dicintio (at) fastwebnet (dot) it

--------------------
Maurizio

 |  IP: Logged

Flavio Stabile
Jedi Master Film Handler

Posts: 707
From: Roma, Italia
Registered: Feb 2005


 - posted June 30, 2009 02:00 PM      Profile for Flavio Stabile     Send New Private Message       Edit/Delete Post 
Thanks for your detailed explanation, Maurizio!

To recap: there are mainly three phases:

1. ACQUISITION (import the S8 material on a PC using a digitazion method like a normal digital camaera, and ripping a DVD as source)

2. EDITING (edit the DVD source to create an exaxt replication in terms of AUDIO and VIDEO of the S8 sequence previously captured)

3. RECORDING (play the edited DVD source from the PC and record the audio on S8 using the GS + Pedro BOx)

Well, while I'm quiet confident with step 1 and 3, I would like to ask you more on step 2:

1. Using PREMIERE how do you view the two video on a single preview screen?

2. Which format (MPEG2, AVI, other) do you use to execute the editing?

3 Can you let me see a capture screen of ADOBE with a sample of the arranged video and audio tracks and the preview video?

Thanks for your reply
Flavio

[ July 02, 2009, 03:07 PM: Message edited by: Flavio Stabile ]

 |  IP: Logged

Maurizio Di Cintio
Jedi Master Film Handler

Posts: 977
From: Ortona, Italy
Registered: Jan 2004


 - posted July 02, 2009 02:04 PM      Profile for Maurizio Di Cintio     Send New Private Message       Edit/Delete Post 
I split the screen. You have countelss video tracks: you put the S/8 pix on - say - track 1 and the video source on track 2. You set the time line to view both AND resize the frames in the monitor window, so that both thumbnails can show side by side. It's not very convenient but it works.

Question # 2: I confess I'm not very sure, but it should be AVI. For sure I do capture the DVD material in this format.

3 I don't capture the DVD through Premiere: I use a software called "Life View - Fly TV" and save on a dedicated disk. Then I import that material. Don't ask me more details because I myself don't know them. The person who arranged the computer took care of everything for me to work. And that's the only important thing to me.

I don't understand what you want to see, or better, I do, but I can't figure out how to do it.

--------------------
Maurizio

 |  IP: Logged

Flavio Stabile
Jedi Master Film Handler

Posts: 707
From: Roma, Italia
Registered: Feb 2005


 - posted July 02, 2009 03:52 PM      Profile for Flavio Stabile     Send New Private Message       Edit/Delete Post 
This is what I mean with my last question

 -

here I'm using Sony Vegas 9 but the editing is not so simple to me...

I'm trying with MPEG2, which is the orignal DVD format

The upper part of the monitor window shows the DVD source, the lower part, the Super 8 capture.

This is the beginning only...

Flavio

 |  IP: Logged

Osi Osgood
Film God

Posts: 10204
From: Mountian Home, ID.
Registered: Jul 2005


 - posted July 02, 2009 08:00 PM      Profile for Osi Osgood   Author's Homepage     Send New Private Message       Edit/Delete Post 
Hey! That's BEN HUR

--------------------
"All these moments will be lost in time, just like ... tears, in the rain. "

 |  IP: Logged

Flavio Stabile
Jedi Master Film Handler

Posts: 707
From: Roma, Italia
Registered: Feb 2005


 - posted July 03, 2009 02:12 AM      Profile for Flavio Stabile     Send New Private Message       Edit/Delete Post 
Yes OSI! Good eye!
I've got a German version and I would like to dub in Italian...
Unfortunately there are a lot of splices on the master (not the Super 8!) so I need to edit it before re-recording..

Flavio

 |  IP: Logged

Maurizio Di Cintio
Jedi Master Film Handler

Posts: 977
From: Ortona, Italy
Registered: Jan 2004


 - posted July 03, 2009 03:17 AM      Profile for Maurizio Di Cintio     Send New Private Message       Edit/Delete Post 
Yes, that's what I was thinking of. But how did you do that? Have you taken a picture of the screen? In any case my set up looks quite the same...

--------------------
Maurizio

 |  IP: Logged

Flavio Stabile
Jedi Master Film Handler

Posts: 707
From: Roma, Italia
Registered: Feb 2005


 - posted July 03, 2009 04:36 AM      Profile for Flavio Stabile     Send New Private Message       Edit/Delete Post 
If you have a graphic program like Jasc Paint Shop Pro, grabbing a part of the PC screen is quiet simple: there is a specific functionality (under File> Import> Screen Capture) that let you acquire everything is on your desktop!

Flavio

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2