8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Eumig Mark-S 712 D

 - UBBFriend: Email this page to someone!    
Author Topic: Eumig Mark-S 712 D
Bruce Baldwin
Junior
Posts: 1
From: South Africa
Registered: Dec 2012


 - posted December 16, 2012 04:30 AM      Profile for Bruce Baldwin   Email Bruce Baldwin   Send New Private Message       Edit/Delete Post 
Please can anybody assist in how to change the sprockets of this projector and what it looks like as I did not get the sprockets to change it to a normal 8. I am a toolmaker by trade and can make it if provided a picture of the said component. If I can purchase the components it will be highly appreciated. Please contact me on my e-mail at bbaldwin@iburst.co.za.

 |  IP: Logged

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010


 - posted December 16, 2012 05:32 AM      Profile for Pasquale DAlessio     Send New Private Message       Edit/Delete Post 
Hi Bruce

Welcome to the forum!

Just pull the film guide down and the sprockets twist and pull off. You also need to change the film channel guide near the lens.

PatD

[ December 16, 2012, 08:52 AM: Message edited by: Pasquale DAlessio ]

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2