8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Need Help Elmo ST1200

 - UBBFriend: Email this page to someone!    
Author Topic: Need Help Elmo ST1200
Dick Lee
Film Handler

Posts: 40
From: Oklahoma City
Registered: Apr 2004


 - posted June 10, 2004 07:32 PM      Profile for Dick Lee   Email Dick Lee   Send New Private Message       Edit/Delete Post 
Help!

I tried to use a 1200' reel today and the rear film guide that is supposed to slide out of the way, does until the take up reel starts moving, then it jumps over to rub against the reel. Is there a reasonably easy fix or is it time to take it to a pro? [Confused]

Thanks,

Dick Lee

 |  IP: Logged

Chris Quinn
Master Film Handler

Posts: 372
From: England, Bedfordshire.
Registered: Nov 2003


 - posted June 11, 2004 07:29 AM      Profile for Chris Quinn     Send New Private Message       Edit/Delete Post 
Hi Dick,
If i remember right it push's in and then flip to the right, are you sure your flipping it over right, sounds odd that it should be not holding in it's 1200ft position.

Chris. [Wink]

--------------------
The other half thinks i'm up to something. Shes right of course.

 |  IP: Logged

Dick Lee
Film Handler

Posts: 40
From: Oklahoma City
Registered: Apr 2004


 - posted June 11, 2004 08:22 AM      Profile for Dick Lee   Email Dick Lee   Send New Private Message       Edit/Delete Post 
Chris:

Thanks for the fast reply. Yes, I am pushing it to the right as far as it will go. When it catches, it stays in that position, but the slightest touch will cause it to jump back to it's standard position. Very maddening [Mad]

Dick

 |  IP: Logged

Tom Photiou
Film God

Posts: 4837
From: Plymouth U.K
Registered: Dec 2003


 - posted June 11, 2004 11:41 AM      Profile for Tom Photiou     Send New Private Message       Edit/Delete Post 
Dick, if its of help i can perhaps send you the extract from the repair maneul if you would like to e-mail me.

 |  IP: Logged

Kevin Faulkner
Film God

Posts: 4071
From: Essex UK
Registered: Jun 2003


 - posted June 18, 2004 04:30 PM      Profile for Kevin Faulkner         Edit/Delete Post 
Very strange one that unless something is broken. I would check it aginst the page Tom sends you from the manual. Normally the guide sits well back out of the way.

Kev.

--------------------
GS1200 Xenon with Elmo 1.0...great combo along with a 16-CL Xenon for that super bright white light.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2