8mm Forum: Eumig Chemo-splicer

»	8mm Forum » 8mm Forum » Eumig Chemo-splicer

UBBFriend: Email this page to someone!

Author

Topic: Eumig Chemo-splicer

Brian Collins
Film Handler

Posts: 96
From: Christchurch UK
Registered: Jan 2007

posted January 18, 2007 08:57 AM

I have just got a box of bits & pieces and there is a Eumig Chemo-splicer Z02 in there but have no instructions, can anybody advise please, also is 2 8mm sound striper's, a Johnson-Glanvill and Balfour Rexette, do people still use them or are they only any good for the bin.
Regards Brian

| IP: Logged

Mike Peckham
Phenomenal Film Handler

Posts: 1461
From: West Sussex, UK.
Registered: Jun 2003

posted January 18, 2007 04:23 PM

Hello Brian

Can't help you with the splicer I'm afraid, but you'll find that people still use the stripers and if you're not going to use them yourself it might be worth advertising them on here, or filmshooting.com or ebay.

I have a Rexette striper that I bought form Tom Photiou some time ago, they are nice machines and it is still possible to buy the stripe for them. Some people (myself included [Roll Eyes]

) still film lip sync movies on super 8 using double system sound recording and then post striping the films.

Our resident stripe expert was Tim Christian, but I haven't seen him post for a while...

Mike [Smile]

--------------------
Auntie Em must have stopped wondering where I am by now...

| IP: Logged

Alex Fox
Expert Film Handler

Posts: 179
From: Vineland Ontario Canada
Registered: Jul 2003

posted January 19, 2007 09:35 AM

Hello Brian, I have one of these Eumig Chemo splicers,a special cement was required for it supplied by Eumig.The idea of the splicer was OK ( butt joint) but I found that the splices did not last. I do not know if the cement is still available and if it would work on the type of film used know. Alex

| IP: Logged

Brian Collins
Film Handler

Posts: 96
From: Christchurch UK
Registered: Jan 2007

posted January 19, 2007 09:40 AM

Thanks Folks for your info. on Sound Striper and Eumig Splicer.Brian

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2