8mm Forum: Eumig Mark S Sound Questions

»	8mm Forum » 8mm Forum » Eumig Mark S Sound Questions

UBBFriend: Email this page to someone!

Author

Topic: Eumig Mark S Sound Questions

Stewart McSporran
Master Film Handler

Posts: 272
From: Glasgow, Scotland
Registered: Nov 2003

posted January 18, 2007 03:54 PM

The sound isn't working on my Eumig Mark S. The valves light up, but there's nothing at all from the speaker, not even mains hum.

Does anyone know what the pin outs of the two DIN sockets on the back of the machine are? Any chance one is a line out that I could send to an external amplifier and not bother trying to fix the on board one?

Failing that, any tips for debugging this machine? I'm ok with digital electronics but valves are a little before my time!

thanks
Stewart

| IP: Logged

Craig Hamilton
Jedi Master Film Handler

Posts: 501
From: Luton
Registered: Sep 2004

posted January 18, 2007 06:29 PM

Stuart

Have you checked all three valves? There is a valve located behind a black cover plate on the soundboard. It is held in place by a single brass screw.

Eumig Soundboard

Craig

--------------------
I dream of becoming a dealer!!!!!!
Is Perry's Movies for Sale.

| IP: Logged

Stewart McSporran
Master Film Handler

Posts: 272
From: Glasgow, Scotland
Registered: Nov 2003

posted January 19, 2007 04:57 PM

Craig, yes I did. I removed all the covers, etc, then powered up the machine.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2