David Pannell
Phenomenal Film Handler
Posts: 1072
From: Horsham, West Sussex, UK
Registered: Nov 2004
|
posted February 10, 2007 03:22 AM
Hello Yannis and welcome to the Forum. Have fun here.
Whilst silicone based lubricants are fine for plastic and nylon gears, a spray lubricant will be too thin for gears. A silicone grease would be more appropriate, otherwise you will have to lubricate more often; and it could find its way into areas which should be kept dry.
Hope this helps.
Best regards,
-------------------- Dave.
Valves and celluloid - a great combination! Early technology rules OK!
| IP: Logged
|