This is topic Unseen forces in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=002836
Posted by Reb Tanner (Member # 649) on June 08, 2007, 05:31 AM:
I went to get my Eumig 810 last night & found the two halves of the casing had bizarrely 'slipped' so that one overlapped the other. It's gonna take a magician to explain, but if anyone can give it a shot go ahead.
SO - I need a new std-8 projector. With sound - optical would be even better.
Anyone recommend another model? The 810 is cool but the fan noise in the off position is a bit of a drag.
Cheers
Jim
Posted by Barry Johnson (Member # 84) on June 08, 2007, 09:14 AM:
Not too sure on what you have described,but if its just a case of 'slipping' and it does not affect any of the works,then it should be OK to use.Perhaps you could explain in a bit more detail??
As for optical Std8 sound projectors,there is only one-and I own one-the TOEI TALKIE mag/opt from circa 1962.But Std8 optical prints,I certainly heave never ever seen anyh in forty years of collecting.
Posted by Osi Osgood (Member # 424) on June 08, 2007, 10:11 AM:
Believe it or not Barry, a seller here in the states had a standard 8mm optical sound copy of "Futureworld". I'm not kidding! I REALLY wish that I had bought that, just for curiosities sake.
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2