8mm Forum: ST1200 assurance before I go in!

»	8mm Forum » 8mm Forum » ST1200 assurance before I go in!

UBBFriend: Email this page to someone!

Author

Topic: ST1200 assurance before I go in!

Barry Johnson
Master Film Handler

Posts: 358
From: United Kingdom
Registered: Jul 2003

posted October 14, 2007 10:40 AM

Fitted new drive rubbers and the two small drive belts but,now must change the long belt accross the top of the machine.It looks straight forward by removing the gearsand then easing the belt round space available.
Knowing my luck there is probably a wrong way to do this so that is why I need some guidance.
Anything I should watch out for then??

--------------------
Standard8 rules!!

| IP: Logged

Tom Photiou
Film God

Posts: 4837
From: Plymouth U.K
Registered: Dec 2003

posted October 14, 2007 11:25 AM

Not really Barry,as you say once the gear is out the way its just lift it over and out, once its out though make sure you give the groove of both pullys a ood clean out.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2