8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Elmo ST1200 Focus Query

 - UBBFriend: Email this page to someone!    
Author Topic: Elmo ST1200 Focus Query
Simon McConway
Phenomenal Film Handler

Posts: 1085
From: Doncaster, UK
Registered: Jun 2004


 - posted December 09, 2007 02:10 PM      Profile for Simon McConway     Send New Private Message       Edit/Delete Post 
On my Elmo ST 1200 HD, there is a minor focus problem in that I cannot get the entire picture pin-sharp. The right hand side of the picture is very slightly "soft" when the middle is fine. It's not a big problem, in fact most probably wouldn't even notice, but I just wondered if there was a simple adjustment?

 |  IP: Logged

Kevin Faulkner
Film God

Posts: 4071
From: Essex UK
Registered: Jun 2003


 - posted December 09, 2007 02:19 PM      Profile for Kevin Faulkner         Edit/Delete Post 
Yes on the bottom of the lens mount on the right hand side as viewed from the front of the machine you will see a very small cross head screw. This is for making sure the lens is paralell to the film. Only a small adjustment will be needed.

Kev.

--------------------
GS1200 Xenon with Elmo 1.0...great combo along with a 16-CL Xenon for that super bright white light.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2