This is topic S710D in forum 8mm Forum at 8mm Forum.
To visit this topic, use this URL:
https://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003399
Posted by Brian Collins (Member # 761) on January 18, 2008, 05:13 PM:
Hi David, Yes I am using the correct sprockets and gate and it has been working fine then all of a sudden it tore little slots in the perferations and can find no reason for it, thanks for your input.
Brian
Posted by Douglas Meltzer (Member # 28) on January 18, 2008, 06:32 PM:
Brian,
Please post your reply to David in your original thread, "Eumig S710D". No need to start a new one.
Good luck with your projector!
Doug
Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC
UBB.classicTM
6.3.1.2