8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Super 8 Projector Repair question...

- UBBFriend: Email this page to someone!    
Author Topic: Super 8 Projector Repair question...
Robert Neia
Film Handler

Posts: 65
From: Palm Springs, Florida,USA
Registered: Aug 2007

- posted August 29, 2008 06:34 PM      Profile for Robert Neia     Send New Private Message       Edit/Delete Post 
Hello All,

I have a Eumig projector that has a damaged claw. I was hoping to get another eumig projector and take its claw out and put it into my eumig and see if i could get it running. I was wondering if there will be any type of an issue in terms of part compatibility? Any ideas? Thanks...

 |  IP: Logged
Sam J. Clarke
Junior
Posts: 28
From: Newcastle, England
Registered: May 2008

- posted August 29, 2008 06:54 PM      Profile for Sam J. Clarke   Email Sam J. Clarke   Send New Private Message       Edit/Delete Post 
I have an Eumig Mark S (Can't remember model) which is broken, if you don't already have a new claw and there are no compatibility problems you can have the one from that.

Sam

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2