8mm Forum: Fuses for a Bolex-Paillard 18-5 projector

»	8mm Forum » 8mm Forum » Fuses for a Bolex-Paillard 18-5 projector

UBBFriend: Email this page to someone!

Author

Topic: Fuses for a Bolex-Paillard 18-5 projector

Patrick Briar
Junior
Posts: 6
From: Lady Lake Florida
Registered: Jun 2009

posted July 03, 2009 07:24 AM

Does anyone know the type of fuse that the Bolex 18-5 uses? I need to find a replacement and have lost the old fuse. Is there a specific amperage and length or is this a suitable substitute that I can pick up at Radio Shack?

Thanks for your help,

Patrick.

--------------------
Patrick Briar

| IP: Logged

Glenn Brady
Expert Film Handler

Posts: 117
From: North Carolina, USA
Registered: Nov 2006

posted July 03, 2009 07:38 AM

Instructions for my 18-5 indicate that, for voltages up to 160V, the fuse should be 1.25A. The fuse is 3/4-inch long.

[ July 03, 2009, 11:10 AM: Message edited by: Glenn Brady ]

| IP: Logged

Patrick Briar
Junior
Posts: 6
From: Lady Lake Florida
Registered: Jun 2009

posted July 03, 2009 03:44 PM

Thanks for the post!

--------------------
Patrick Briar

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2