8mm Forum: Changing take up belt on a Fujicascope MG90

»	8mm Forum » 8mm Forum » Changing take up belt on a Fujicascope MG90

UBBFriend: Email this page to someone!

Author

Topic: Changing take up belt on a Fujicascope MG90

John Davis
Master Film Handler

Posts: 286
From: Dunfermline, Fife, UK
Registered: Jun 2008

posted September 03, 2009 02:42 PM

I have managed to get my hands on a set of belts for this projector and intend to replace the belt for the take-up reel, which is the longest of the set. Having taken the back cover off, my jaw has hit the table - Droopy style. It looks very daunting!
Has anyone any experience changing the belts on these machines (I think they match the MX50 and MX70 as externally they all look quite similar),
help!
John

| IP: Logged

Peter van den Oetelaar
Junior
Posts: 5
From: Valkenswaard, The Netherlands
Registered: Sep 2015

posted September 22, 2015 06:39 PM

I would like to know this too :-)

I've got one of these with the sync box.

| IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003

posted September 22, 2015 09:11 PM

The best thing to do is try to find the manual for this machine: I'm seeing .pdf copies available on the 'net., maybe used ones will pop up on E-bay.

With a little luck somebody here knows this machine. It's not among the ones we commonly discuss here, but there are a lot of members so just maybe...

--------------------
All I ask is a wide screen and a projector to light her by...

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2